Skip to main content Stop all automatic animation Skip to footer site map
Page Content


How To Clean Your Baseball Bat Or Softball Bat

How To Clean Your Baseball or Softball Bat

Scuff marks, ball debris, dust, dirt, and grime – your baseball bat and/or softball bat is covered with it. It's all part of the game we know and love, but at some point, your bat will get too dirty and begin to affect your performance. You're going to have to learn how to clean your baseball bat or softball bat if you want to keep using it, and the Bat Experts at JustBats are here to help. 

Hitting a baseball or softball is hard enough as it is, but when your bat starts slowing down because of all the built-up dirt, it makes it that much harder. Not to mention, if you're playing in colder weather conditions, that dirt can turn into ice and make gripping the bat even more difficult. 

Luckily, understanding how to clean your bat is a relatively straightforward process that only requires a few simple tools and supplies. In this guide, we'll walk you through the steps involved in how to clean your bat so you can get back to crushing home runs in no time!

Bat Assurance

How to Clean Your Baseball or Softball Bat 

The Magic Eraser Trick

 When you're trying to figure out how to clean your bat, the very first thing that comes to mind is probably a bucket of soap and water. Unfortunately, this method doesn't quite cut it when it comes to removing all of the grime from deep within your bat. If you use soap and water, you'll only be able to get a small fraction of the dirt and dust out. So you'll need to use a unique technique instead. 

We recommend the simplest solution possible: a magic eraser.

This is a fantastic approach to restoring your bat in no time, and it's far better than the technique advised by most other people. 

Magic Eraser has a unique structure that is capable of removing dirt from the most difficult places in your bat. Its microfibers can penetrate even the tiniest holes and cracks, leaving behind a squeaky clean bat that is good as new. It works by soaking up all of the grime, and it can clean every inch of a baseball or softball bat with ease! All you have to do is add a bit of water to your bat and then rub the magic eraser in a circular motion. We've learned that smearing the marks with fast movement and some pressure is the simplest method to remove them.

Like with anything else, it's important to be gentle when using a magic eraser on your bat. You don't want to damage the surface or remove any of the paint in the process. For good measure, we recommend spending anywhere from 10 to 15 seconds on each area. A Magic Eraser is inexpensive, easy to find, and lasts a long time. There is no downside to this approach!

Tips From The Manufacturer

Another method when it comes to learning how to clean your softball bat or baseball bat is to read the manufacturer's instructions. Although this may seem obvious and simple, we've found that it can be difficult for some people to find their manual in a matter of seconds when they really need it. Therefore, it's always best to keep your user guide somewhere safe or just download another copy from the company website if you lose it.

When it comes to cleaning your bat, the manufacturer will usually advise you to use a bucket of soapy water and a sponge or cloth. This is one of the most common methods out there, but it's not always as effective as using a magic eraser. You'll need to scrub all over the surface of your bat with a sponge or cloth to remove the dirt, but some of it may not come off during this process. We recommend going over your bat again after you've let it dry for several minutes just to be sure that all of the grime is gone and there's nothing left behind.

Hone in on the areas where your hands hold the bat the most, and make sure to clean those extra well. You don't want any dirt or dust building up in that area and causing your grip to weaken over time.

Wood vs Composite vs Aluminum

Composite bats and aluminum bats tend to be more durable and can handle a bit more punishment than their wooden counterparts. Simply put, they're less likely to break. 

However, the cleaning process is still the same. You'll need to use a magic eraser and some water to get the dirt out of all of the nooks and crannies in your bat. The only difference is that you don't have to be as careful when using the eraser because it's less likely to damage the surface. We recommend spending around the same amount of time on each section, but feel free to go over any areas that look especially dirty. And make sure to dry your bat off entirely before using it in a game or practice!

JB Loyalty

_ _ _

Is your baseball bat or softball bat dirty beyond repair? Click here to answer a few short questions, and our Bat Coach will reveal hand-picked results just for you to shop from. Or, you can contact one of our friendly Bat Experts at 866-321-2287, email, or click here to live chat, and they can help guide you in the right direction. We are here for you from click to hit!

Shop All Bats

Chat Us
You can compare a maximum of four items.
Please remove one item to add another.
Add up to 4 items to compare.
Show Comparison
4.9 Star Rating, Google Customer Reviews